MotoGP

Testing continues in Sepang for Marc Márquez and Dani Pedrosa

3 minutes

On day two of the official test in Sepang, the action started around 11a.m., after riders had waited for the asphalt to dry from an overnight downpour.

Dani Pedrosa RC213V test de Sepang 2018
Testing continues in Sepang for Marc Márquez and Dani Pedrosa

We tried a new fairing, and when you do that type of test you have to adjust the bike’s balance a little bit


twittear

Marc Márquez

No further rain disrupted the proceedings until the very last minutes of the session.

Marc Márquez and Dani Pedrosa were therefore able to take advantage of a full day of work to carry out a number of tests on several areas of their bikes’ setup, including engine, aerodynamics, suspension, and tyres, and they posted the seventh (1’59.730) and 12th (in 1’59.999) fastest times, respectively. Marc suffered an uneventful tumble at turn two during his last run, when a light rain started to fall.

The test will conclude tomorrow.


Marc Márquez

“Today I’m very happy because we made some steps forward and I felt really good on my bike, especially in the afternoon, when we put everything in place and I did my fastest lap when the temperature was highest. Besides continuing our work on the engine and setup, we tried a new fairing, and when you do that type of test you have to adjust the bike’s balance a little bit. We’ll need to do more laps to collect more data and get used to riding with it. There are a few things we need to improve more, several areas of the setup that we have to adjust, but so far I’m happy with our pace and think we’re working well. Unfortunately, when we fit a new tyre at the end of the day, it started to rain a bit. I lost the front at turn two even though I wasn’t really pushing, but it wasn’t important.”


Dani Pedrosa

“Today we had a full-day session that allowed us to carry out many tests. We mainly used the new engine specifications, and we worked a lot on a new fairing and other combinations with the aerodynamics. We also worked on the suspension and tyres because with this type of work, you have to make many adjustments to the settings. Some aspects were good right away—the wheelie control was better, and we were able to apply more torque on corner-exit—but we need to improve other aspects and also try everything again at a different track. Anyway, the feeling was generally positive again today; we were quite precise in our work and managed to follow our testing plan well. Tomorrow will be the final day, and we’ll try and work more on the details.”

Volver arriba

Leave a Reply

Your email address will not be published. Required fields are marked *

By making a comment, you agree to our privacy policy